另一安装方法 (Another Installation Method)：

如因空间限制或其他原因而无法按照基本步骤安装边接位时，可以从 旁边连接，方法如下：

1. 按照基本步骤的、第二及第三步。

2. 将联接驳头拆下，然后将四条母线槽临时固定，其间距与安装尺寸相等。

3. 从侧面将联接驳头压入。

4. 检查此时连接位状态，应于完成基本步骤第四点后无异。

5. 按照基本步骤第五点开始继续进行安装。

If it is not possible to install the edge connector according to the basic steps due to space limitations or other reasons, you can connect it from the side as follows:

1. Follow the first, second, and third steps of the basic procedure.

2. Remove the connecting connector and temporarily fix the four bus ducts to ensure their spacing and installation dimensions equal.

3. Press the connecting connector into the side.

4. Check the status of the connection bit at this time, which should be no different after completing the fourth point of the basic steps.

5. Follow the basic steps from point five to continue the installation.